I’ve been slowly pressing on with the electrics. In particular, I’ve finished doing the engine loom, easily the most complicated bit, which is shown here languishing in the kitchen. This now fits the car and, as you can see, I’ve taped it all up so it shouldn’t be vibrating to bits at the first sight of a working car.
Archive for May, 2010
It’s time to press on with the electrics, and the first part was to fit the battery. I decided to position this low down behind the driver’s seat so I made a little plinth for it and held it in place with some bits of aluminium angle and, yes folks, some chunky tie-wraps.
I’ve got the main switch panel finished, as in the photo on the right. All I’ve got to do for the wiring now is to connect to those connectors that you can see sticking into space. The ones that aren’t connected to anything.
